| |
Hosted By GoDaddy
|
What's New?
Read about our new In-Wall heating system and zone heating improvements that will make your home more comfortable and a safer, healthy environment!
|
|
CZ Infrared™
Infrared Heater Specifications & Features
CZ Infrared Heaters' unique heat exchanger incorporates a copper lined, low pressure air flow path which eliminates the need for a high pressure fan. This feature offers quiet, high volume air flow through the unit. This technology eliminates the harmful electromagnetic waves produced by conventional heaters.
The infrared emitters in the CZ lnfrared™ Heater feature a stainless steel diffusion coil which enhances the efficiency of the system by as much as 14% over other portable infrared heaters. All of our models include:
- Electronic comfort control thermostat, and digital temperature display accurate to ±1 degree
- Full-function, Credit-Card style remote control
- Delay start feature to use when no one is home
3-Year Warranty
All of our CZ Infrared™ Heaters are backed with an exceptional 3-year manufacturer's warranty.
New Design & Serviceability Features
CZ Infrared™ Heater's new design incorporates serviceability features not found in other portable heaters. In the unlikely event that a component must be replaced, the CZ Infrared”' Heater is designed for complete component replacement in just a few minutes. Parts are always available through our network of sales representatives and distributors.
Built To Last
Our heaters are a high quality solid-state modular design, packed with many innovative features and built to provide years of dependable service. 
Wood Models:
Cabinet : ¾ ply - Oak, Cherry or Tuscan Walnut finish
Weight : Approx. 28 lbs
Dimensions : 14" x 13½” x 16½” (H,W,D) |
Plastic Models: Cabinet : ABS 94-VO fire retardant plastic—black with wood trim
Weight : Approx 21 lbs
Dimensions : 14" x 13½” x 16½” (H,W,D) |
|
Standard Heater Features for Wood & Plastic Models: Power Requirements: 115 Volt AC,
The heater now has two different power settings 750 watts and 1500 watts. The 750 Watt power setting is “super quiet” for bedroom situations.
Power Cord: 6 foot—14 gauge
Thermostat: Electronic Analog with large number display
Accuracy: ±1 degree
Delayed Start Function: Can be delayed up to 24 hours
Safety Cut-Off : Yes
Listed Approvals : TUV-US & International (UL Equivalent)
Remote Control : Credit card sized with a large button surface
Pre-Filter : Washable pre-filter
Cord Storage : Convenient Cord Wrap for transport & storage
Heat Chamber : Copper-ion generation panel, stainless steel diffusion coils
Heating Elements : Four (4) quartz infrared emitters with a life expectancy rated at 30,000 hours
Lifetime Electrostatic Filter : Maintains air quality, easily removable for cleaning
Heat Type : Therapeutic Far-Infrared Heat
Fan System : The new two speed fan produces 1100 rpm on high and 800 Low rpm on low. The double ball bearing scroll fan has been newly designed this year for the new CZ Infrared™ BLUE EDITION models and is bigger and quieter than before.
Warranty : Limited 3-Year Warranty and now with a 30-Day Money-Back Guarantee
|
| Tips for Best Performance |
Your CZ Infrared™ Heater will save you a whole lot of money, and it's easy to operate and maintain. Operating at maximum performance, your CZ Infrared™ Heater can save you even more cash.
Here are some easy to follow recommendations to get the most out of your infrared heater (and put more money back in your pocket!):
- Locate the infrared heater in an area with a room with low airflow. The infrared heat will be better contained in a room that does not have a high air exchange rate.
- Place the infrared heater near a warmer inside wall and direct the output toward a cooler outside wall. The cooler outside wall will tend to draw the generated heat towards it, which will allow for more efficient heating throughout the room.
- Placing the infrared heater next to a cold air return will draw the heat away from the area to be heated. Try closing or covering the cold air return. This will allow for more efficient heating. Experiment with the placement of the heater to see what works best for you.
- To ensure maximum efficiency, a 30% minimum relative humidity should be maintained in the heated environment. This is usually not a concern.
- The infrared heater is designed to operate for maximum efficiency in the 68-74 degree Fahrenheit range. Due to the soft heat concept , a temperature of 68 degrees Fahrenheit feels as though it were 72 degrees Fahrenheit. This is due to the infrared heat mixing with humidity evenly for head-to-toe comfort.
- When the infrared heater is placed in an isolated area, i.e. basement or recreation area, any existing HVAC heating system vents should be closed in that area, if possible. This allows the heater to maintain the isolated area more efficiently.
- When heating a room with bare concrete, place the infrared heater a few feet above the floor (make sure the heater is secure and won't fall!). This will allow for more efficient heating since concrete acts as a heat sink and will tend to draw the heat out of the room.
- If possible, concrete floors should be covered to provide some insulation factor from the concrete.
- Set your central heating system to a lower temperature. Place the infrared heater in the area you spend the most of your time. Now set the heater to your comfort level. There is no point in heating multiple rooms to 68+ degrees Fahrenheit when not in use.
- When heating larger areas, place the heater in a central location. The nature of the thermal infrared heat wave is to constantly reach out for more objects to warm.
- If the heater is used in a dirty or dusty area, the filter must be cleaned more frequently. Your infrared heater will operate best when it can breathe easily.
|
|
|
|
